| Specification |
|
|
1 BOOTROM slot |
|
|
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000Base-T: UTP category 5, 5e cable (maximum 100m) |
|
|
1000M Link/Act, 100M Link/Act, 10 Link/Act, Duplex |
|
|
FCC, CE |
|
|
0℃~40℃ (32℉~104℉) |
|
|
-40℃~70℃ (-40℉~158℉) |
|
|
10%~90% non-condensing |
|
|
5%~90% non-condensing |
|
|
Windows 95/98/ME/NT4.0/2000/2003/XP/Vista, Netware, Linux |
|
|
IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1q, 802.1p CSMA/CD, TCP/IP, PCI Revision 2.1/2.2 |
|
|
32-bit PCI |
|
|
10/100Mbps for Half-Duplex mode 20/200/2000Mbps for Full-Duplex mode |
|
|
One STP/UTP connector, Provides LEDs to indicate network Link/Activity/Speed/Duplex, Plug and Play |
|
|
Complies with the PCI Revision 2.1/2.2 and IEEE 802.3 10Base-T,IEEE 802.3u 100Base-TX and IEEE 802.3ab 1000Base-T standard |
|
|
Flow Control - IEEE 802.3x Flow Control (Full-Duplex) |
|
|
Jubmo Frame - 7680Bytes |
|
|
10/100/1000Mbps RJ45 |
| Features |
- Supports 32-bit 33/66MHz PCI Bus
|
- Supports 10/100/1000Mbps Nway Auto-Negotiation
|
- Supports 10/100Mbps full and half duplex; 1000Mbps full duplex Supports Full Duplex Flow Control (IEEE 802.3x)
|
- Supports IEEE 802.1P; IEEE 802.1Q VLAN tag
|
|
|
|
|
- Provides Bootrom slot; supporting remote boot
|
- Supports ACPI; PCI power management
|
- Contain two large independent receive and transmit FIFOs
|
|
|
- Provides LEDs to indicate network Link/Activity/Speed/Duplex
|
|
|
